ESP32-S3 UNO USB-C ESP32-WROOM N16R8 Entwickler Board

ESP32-S3 UNO USB-C ESP32-WROOM N16R8 8M PSRAM 16M Flash Python Entwickler Development Board

ESP32-S3 UNO form factor USB-C Development Board © androegg

ESP32-S3 UNO form factor USB-C Development Board © androegg

ESP32-S3 UNO form factor USB-C Development Board Pinout © androegg

ESP32-S3 UNO form factor USB-C Development Board Dimensions © androegg

ESP32-S3 Entwicklerboard im UNO Formfaktor basiert auf dem ESP32-S3 N16R8 mit 8MB PSRAM und 16MB SPI Flash.

ESP32-S3 USB-C Entwicklerboard von verfügt über

• AMS1117 3,3V Spannungskonverter
• CH340 USB TTL Converter
• Reset Taster
• Power LED
• WS2812 RGB LED (Pin8)
• 5,5×2,1 mm Hohlsteckeranschlus für Spannungsversorgungen von 5-18V

Sämtliche Anschlüsse des ESP32-S3 Modul werden auf Pinsockel ausgeführt.

Das ESP32-S3 eignet sich für

• Espressif ESP-IDF SDK
• Python
• Python Thonny
• CircuitPython
• Espressif IDF
• Arduino (Espressif ESP32 Arduino Core 2.0.3 und höher)
• Tasmota (tasmota32s3- binaries)

Das ESP32-S3 Entwicklerboard basiert auf der Xtensa® Dual Core 32bit MCU mit bis zu 240MHz. Kombination mit einem 16MB SPI Flash Speicher und 8MB PSRAM

ESP32-S3 UNO Entwicklerboard

Im Vergleich zu typischen ESP32 Entwicklerboards verfügt dieses ESP32 -S3 Entwicklerboard zusätzlich über einen 5,5×2,1 mm Hohlsteckeranschluss für Spanungsversorgungen von 5-18V.

Über eine integrierte USB-C Schnittstelle kann sowohl die Spannungsversorgung als auch serielle Anbindung erfolgen.

Das ESP32-S3 UNO Entwickler Board verfügt über eine CH340C USB TTL Konverter, sodass eine direkte, serielle Kommunikation über die USB Schnittstelle erfolgen kann.

Das ESP32-S3 Entwickler Board unterstützt

• 802.11 b/g/n Standard
• HT40 WLan Transceiver
• Bluetooth bis 4.2
• Takfrequenz 240MHz
• SRAM 512kBytes
• 8MB PSRAM
• 16MB SPI Flash
• bis zu 45 GPIO
• unterstützte Schnittstellen
  SPI SD Karte,
  UART,
  SPI,
  SDIO,
  I2C,
  LED PWM,
  Motor PWM,
  I2S,
  IR,
  pulse counter,
  GPIO, capacitive touch sensor,
  ADC 12-bit (bis zu 20 Kanäle),
  DAC,
  Two-Wire Automotive Interface (TWAI®), compatible with ISO11898-1 (CAN Specification 2.0)

The ESP32-S3 USB-C has

• AMS1117 3.3V Voltage Converter
• CH340 USB TTL Converter
• Reset Button
• Power LED
• WS2812 RGB LED (Pin8)
• 5.5×2.1 mm Barrel Jack socket connector for 5-18V power supply

on board.

The ESP32-S3 Developmnet Baord supports

• Espressif ESP-IDF SDK
• Python
• Python Thonny
• CircuitPython
• Espressif IDF
• Arduino (Espressif ESP32 Arduino Core 2.0.3 and later)
• Tasmota (tasmota32s3- binaries)

The ESP32-S3 Development Board is based on Xtensa® Dual Core 32bit MCU with up to 240 MHz. in combination with a 16MB Flash and 8MB PSRAM

ESP32-S3 UNO Development Board

Compared to typical ESP32 Development Boards, this ESP32-S3 UNO Development Board has an additional 5.5×2.1 mm Barrel Jack socket connector and supports power supply from 5-18V.

The 5V main power supply is supported thru USB-C Socket.

For serial communication the ESP32 S3UNO Development Board got also a CH340 USB TTL Converter on board (connected to USB-C Socket)

The ESP32-S3 Development Board supports

• 802.11 b/g/n Standard
• HT40 WLan Transceiver
• Bluetooth up to 4.2
• Frequency 240MHz
• SRAM 512kBytes
• 8MB PSARM
• 16MB SPI Flash
• up to 45 GPIO
• supported Interfaces
  SPI SD Karte,
  UART,
  SPI,
  SDIO,
  I2C,
  LED PWM,
  Motor PWM,
  I2S,
  IR,
  pulse counter,
  GPIO, capacitive touch sensor,
  ADC 12-bit (up to 20 channels),
  DAC,
  Two-Wire Automotive Interface (TWAI®), compatible with ISO11898-1 (CAN Specification 2.0)

ESP32-S32 UNO Formfactor Development Board Features:

• 5V Power Supply thru USB-C Connector
• 5-18V Power Supply thru Barrel Jack Connector
• USB-C (OTG, UART)
• CH340 USB TTL Converter on board
• supports up to 45 GPIO
• CPU / MPU:
  Frequency: up to 240 MHz. based on Tensilica LX7
  448 KByte ROM size
  520 KByte SRAM size
  8MB PSRAM
• SPI Flash:
  Flash memory: 16MB
  clock frequency: 75 MHz.
  Page program: up to 256 bytes in 0.64ms (TYP) Sector erase: 512Kb in 0.6s
  Bulk erase: 17 – 23 s
  Hardware write protection: protected area size defined by nonvolatile bits BP0, BP1, BP2
  Deep power-down: 1μA (TYP)
  Write Cycles: > 100,000 write cycles per sector Data retention: > 20 Years
• 802.11 b/g/n/e/i protocol
• supports Wi-Fi Direct (P2P)
• soft-AP Integrated TCP/IP protocol stack
• 802.11 n (2.4 GHz), up to 150 Mbps
• 802.11 e: QoS for wireless multimedia technology
• Block ACK
• Fragmentation and defragmentation
• Automatic Beacon monitoring/scanning
• 802.11 i security features: pre-authentication and TSN
• Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
• Infrastructure BSS Station mode/SoftAP mode Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
• UMA compliant and certified
• Antenna diversity and selection
• Compliant with Bluetooth v4.2 BR/EDR and BLE specification
• deep sleep current of < 2.5uA
• Class-1, class-2 and class-3 transmitter without external power amplifier
• Enhanced power control
• +10 dBm transmitting power
• NZIF receiver with -98 dBm sensitivity
• Adaptive Frequency Hopping (AFH)
• Standard HCI based on SDIO/SPI/UART
• High speed UART HCI, up to 4 Mbps
• BT 4.2 controller and host stack
• Service Discover Protocol (SDP)
• General Access Profile (GAP)
• Security Manage Protocol (SMP)
• Bluetooth Low Energy (BLE)
• ATT/GATT
• HID
• All GATT-based profile supported
• SPP-Like GATT-based profile
• BLE Beacon
• A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
• CVSD and SBC for audio codec
• Bluetooth Piconet and Scatternet