AT89S52 80C51 8051 DIP-40 MCU IC Board Adapter Set

AT89S52 80C51 8051 DIP-40 MCU IC Board Adapter Set

ATMEL AT89S52 80C51 8051 Microcontroller Development Set © androegg

ATMEL AT89S52 80C51 8051 Microcontroller DIP-40 IC © androegg

8051 80C51 MCU wie folgt verfügbar:

• AT89S52 24PU IC Single 8051 80C51 DIP-40 IC
• AT89S52 24PU Set DIP-40 inkl. Entwickler Board

Der AT89S52 24PU ist ein Single – Chip – CMOS Mikrocontroller mit

•  Three-Level Program Memory Lock
• bis zu 32 I/O lines
• 3 Timers/Counters
• 8 Interrupts Sources
• Watchdog Timer
• 2 DPTRs
• 8K Flash Memory
• 256 Bytes On-chip RAM

Der AT89S52 24PUunterstützt den 8051 / 80C51 Standard / Befehlssatz.

8051 80C51 Single Chip MCU

• AT89S52 24PU IC Single 8051 80C51 DIP-40 IC
• AT89S52 24PU Set DIP-40 incl. Development Board

The Atmel AT89S52 is an 8051 based Full Static CMOS controller with

• Three-Level Program Memory Lock
• up to 32 I/O lines
• 3 Timers/Counters
• 8 Interrupts Sources
• Watchdog Timer
• 2 DPTRs
• 8K Flash Memory
• 256 Bytes On-chip RAM

8051 80C51 Single Chip MCU

The Atmel AT89S52supports the 8051 / 80C51 Standard.

ATMEL AT89S52 24PU Sincle Chip MCU Features:

• Available
  only ATMEL AT89S52 24PU
  DIP-40 IC
  Development Set incl. Development Board and 5V Power Supply
• Compatible with MCS-51® Products
• 8K Bytes of In-System Programmable (ISP) Flash Memory
  – Endurance: 1000 Write/Erase Cycles
• 4.0V to 5.5V Operating Range
• Fully Static Operation: 0 Hz to 33 MHz
• Three-level Program Memory Lock
• 256 x 8-bit Internal RAM
• 32 Programmable I/O Lines
• Three 16-bit Timer/Counters
• Eight Interrupt Sources
• Full Duplex UART Serial Channel
• Low-power Idle and Power-down Modes
• Interrupt Recovery from Power-down Mode
• Watchdog Timer
• Dual Data Pointer
• Power-off Flag